Overview of JMX diaphragm metering pump

Adjustable metering range: 0-280l / h

Large pressure range: 0-0.8Mpa

Driving mode: motor driven

Control mode: manual and automatic control (can receive 4-20mA signal to adjust the flow)

1. Cast aluminum shell, high heat dissipation performance, light overall weight, suitable for all kinds of acid and alkali solution, non-toxic and tasteless.

2. It adopts cam mechanism. It has no leakage on the whole and can be placed on the medicine tank or pipeline.

3. Contact medium pump head is made of PVC, PTFE and stainless steel.

4. It is widely used in water treatment industry with low pressure requirements due to its high cost performance.

5. When the pump is running or stopped, the flow can also be adjusted at will, and the output can be quantified.

6. The diaphragm is pressed by multi-layer composite structure. The first layer is super tough Teflon acid resistant film, the second layer is EPDM elastic rubber, the third layer is 3.mm thick SUS304 to support the iron core, the fourth layer is reinforced by reinforced nylon fiber, and the fifth layer is fully covered with EPDM elastic rubber, which can effectively improve the service life of the diaphragm.

Material of pump head	Working conditions
Metering pump head: PVC, SUS304, SUS316, PTFE	Ambient temperature: - 30 ℃ - 90 ℃
Metering valve: PVC, SUS304, SUS316, PTFE	Motor: two phase, three-phase standard motor or explosion-proof motor
Valve ball: silica, SUS304, SUS316, ceramic	Power: 0.25kw 0.37kw 0.55kw
Seal: PTFE, PVC	Protection grade: IP55